Click on the driver you want to download and then click Install. Installing the Instrument Driver. Using the Instrument Driver. The fastest and easiest way to get to your measurement is by using one of the examples located within the instrument driver. Double-click on an example to open it within the LabVIEW environment. Features ※ GDM-8255A 199,999 Counts Display ※ GDM-8251A 120,000 Counts Display ※ VFD Two Colors Display ※ 0.012% DCV Accuracy ※ True RMS (AC, AC+DC). These modules provide a Python-friendly interface to the particular dialect of IEEE-488 spoken by GW Instek instruments. They depend on the operating system providing a character device for the instrument link - /dev/ttyACM0 or similar on modern Linux installations (no additional drivers are usually. GW Instek 25MHz, 2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display for sale. School rates and price matching for 25MHz, 2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display. List of all available GW Instek Power Supplies products. PST-3202GP - Triple Output Programmable DC Power Supply (with GPIB). $1,595 (CAD) $1,075 (USD) Digitized Programmable Interface, High Resolution 10mV、 1mA 192. 128 LCD Display, Disp.
The AFG-2100/2000 Series Arbitrary Function Generator is a DDS (Direct Digital Synthesized) based signal generator designed to accommodate the Educational and Basic Industrial requirements for an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), Noise and Arbitrary waveforms. The 20M Sa/s sampling rate, 10 bit vertical resolution and 4k point memory of the AFG-2100/2000 Series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1Hz resolution of Sine, Square and Triangle waveforms and the 1% ~ 99% adjustable duty cycle of Square (Pulse) waveform are the remarkable features to greatly extend its application range in various fields.
The AFG-2100/2000 Series includes 6 models in three frequency bands of 5MHz, 12MHz and 25MHz. Besides the basic features of the whole AFG-2100/2000 Series, AFG-2100 also carries additional features of AM/FM/FSK Modulation, Sweep, and Frequency Counter.
The user friendly interface of AFG-2100/2000 Series allows user to set waveform parameters, including waveform type, frequency, amplitude, DC offset, modulation type, and duty cycle, through keypad entry and/or the knob selection, and display the set parameters on the 3.5” LCD screen. The AFG-2100/2000 Series is equipped with a USB Device interface for remote control and waveform editing through a PC. A waveform editing software is provided to facilitate the waveform creation on the PC. After the waveform editing is done, the user is able to download the waveform data from PC to the AFG-2100/2000 Series for signal output.
- Arbitrary Waveform Function
- Adjustable Duty Cycle
- Parameter Setting
- Waveform Amplitude & DC Offset
- AM/FM/FSK Modulation, Sweep & Frequency Counter
- USB Interface
- Arbitrary Waveform Editing PC Software
A Solid Foundation for Reliable, Safe and Practical Safety Compliance Testing
GW Instek is launching to the market a new series of safety tester (hi-pot tester/hipot tester) with high durability and multiple user-protection design. The GPT-9800 Series look to meet a variety of safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety-related requirements for the safety tests of electronic products and components.
A total of 4 safety testers in the GPT-9800 Series, namely GPT-9804, GPT-9803, GPT-9802 and GPT-9801, are available for various applications. The GPT-9804 is a 4-in-1 model capable of performing AC withstanding, DC withstanding, insulation resistance and ground bond tests. The GPT-9803 is a 3-in-1 model capable of performing AC withstanding, DC withstanding as well as insulation resistance tests. The GPT-9802 is capable of performing both AC and DC withstanding tests, whereas the GPT-9801 is able to perform AC withstanding test. The series of safety tester is built upon a high-efficiency PWM amplifier platform with AC 200VA maximum output capacity to impede the influence from the voltage fluctuation of the input AC source. This ensures a stable voltage supply for all the tests of the GPT-9800 Series.
Targeting user’s protections, the GPT-9800 series uses a combination of hardware and software controls to improve safety: A self-check is performed to make sure all the functions and operations are under normal condition each time when the tester is turned on; the Zero Crossing Turn-On design imposes the output voltage to always begin at the zero crossing of a sine wave to avoid the impact of surge voltage output; and the output voltage is automatically cut off (within 150μs) when abnormal output voltages have been detected or when the upper or lower current limits have been reached during testing. To protect operator from hazardous injury, the GPT-9800 Series automatically discharges the DUT after test (within 200ms) each time to eliminate excessive voltage that remains on the DUT. To further ensure safety, the interlock connector can also be used as double protections to prevent inadvertent operation.
The GPT-9800 Series, equipped with a simple & clear panel layout, a high resolution dot matrix LCD display, and color LED indicators, allows operators to interpret measurement results easily and quickly. All major test functions, including AC withstanding (AC 5kV/40mA), DC withstanding (DC 6kV/10mA), insulation resistance (DC 50V ~ 1000V) and ground bond (AC 30A max.) tests, are performed under a high-stability voltage output with high-resolution measurement results. Further more, the test duration, ramp up time and upper/lower limits of the output voltage are fully-adjustable to accommodate a wide variety of safety tests with accurate measurement results.
Other functions and features of the GPT-9800 include: open circuit detection for ground bond testing to get correct measurement result with confidence; 100 sets of memory to save panel settings, which can be recalled for single test individually or for automatic tests in sequence; a remote output on-off terminal in the front panel and a signal I/O port in the rear panel provided as the means for remote start/stop control of the safety tester; RS-232C, USB and GPIB (optional) interfaces available for PC remote control and test result logging.
Gw Instek Driver Manual
- High Efficiency and High Stability Output
- High Accuracy and High Resolution Testing Performance
- Safety Guarding throughout the Testing Period
- Multiple Protection Mechanisms
- Friendly User Interface
- High Efficiency and High Stability Output